Matters needing attention in operation and maintenance of mud pump

Mud pumps are widely used, generally used in construction sites and land development, used as mud water discharge. Discharge of sewage caused by rainy days and mud water accumulated in lowlands during construction, the following Changjia Pump Industry will bring you what specific points should be paid attention to during the use of mud pumps.

Matters needing attention before starting the water pump

First of all, we should carefully check the unblocked condition of the matching inlet and outlet pipes to confirm that there is no blockage. Then check whether the lubricating oil at the bearing position is injected; Then check the packing seal and whether the packing rope is added enough. When the mud pump is running, it shall be equipped with a flushing water pump. The flushing water pump shall inject clean water into the filling of the mud pump to prevent mud from running to the filling and protect the filling. As long as the mud pump is working, the flushing pump cannot be listened to, otherwise the seal will soon be worn away. The gap between the impeller and the guard plate of the mud pump must be reasonable, which will directly affect the service life of the mud pump. If the gap is not up to standard, it may cause noise and vibration of the pump, and the parts in contact with the liquid will be quickly destroyed, so the gap between the impeller and the guard plate of the mud pump must be grasped well, and the screws on the bearing body can be used. Adjust their size. The suction height of mud pump is based on the reference of fresh water pump. Considering the different concentration of mud, the suction height must be different. When selecting mud pump, attention should be paid to the direct relationship between its concentration and suction height. The higher the concentration, the smaller the suction height, because the greater the gravitational potential energy.

Matters needing attention in water pump maintenance

The repair and maintenance of the mud pump should be handed over to professional personnel to complete. In a fixed period of time, the mud pump shall be carefully inspected, maintained and maintained, and the fault shall be warned and the problem shall be solved in time so as not to affect the operation. When the mud pump is running, special attention should be paid to the size of the sediment particle diameter. If the particles are large, the wearing parts should be checked frequently and measures should be taken in time. The wearing parts of the mud pump are different from other pumps, and the pump casing is also a wearing part. In addition, there are bearings, impellers, etc. The wear resistance of the parts of the mud pump should be fully considered in the manufacture, the use time should be increased, the economic investment should be reduced, and the production efficiency should be improved. Mud pump accessories wear fast, should be ready for common accessories, packaging normal production.

Management of Mud Pump

The use of mud pump and construction machinery, machinery and mud pump with smooth operation, so that there will be the best work efficiency. So to ensure the normal operation of construction machinery and mud pump.

Attention should be paid to the operation of mud pump

1. The items to be checked before the mud pump is started are: the fastening strength of the fastening screw should be in place; Whether the rotation direction of the unit is not the design requirement; Whether the coupling rotates flexibly; Whether the inlet and outlet pipes are firmly installed without leakage; Whether the inlet and outlet valves can work normally.

2. When the mud pump is running, the sand content should be checked regularly, and the sand content should not exceed 10%.